Question & Answers
3774 screw terminals X-CONTACT highly resistant to chemicals highly heat resistant contact carrier nickel plated contacts internal fixing enclosure base can be turned 180° with 6 blind holes for mounting special terminals if required X-CONTACT, highly resistant to chemicals, highly heat resistant contact carrier, nickel plated contacts, internal fixing, enclosure base can be turned 180°
41416 fits all CEE plugs, panel mounted and wall mounted inlets from 16 A, 3 p up to 125 A, 5 p not suitable for low voltage Within seconds, this practical locking device can be attached to all CEE plugs, surface-mounted and wall-mounted connectors and secured with a lock. The plug-stop reliably prevents unintentional supply of power, for example during maintenance of remote devices. At the same time, unauthorised use of electrical devices or systems by third parties is prevented. fits all CEE plugs, panel mounted and wall mounted inlets from 16 A, 3 p up to 125 A, 5 p, not suitable for low voltage
41455 METZ Connect, type: RJ45 C6A module, 270° angled (E-DAT module 8(8) socket), Cat.6 suitable for Cepex sockets, part no. 4340, 4342, 4344, 4345 Easy connection of the data cables Mounting without special tools Strain relief via snap-in clip directly on the "loading piece". BTR, Type: RJ45 connection module (type E-DATmodule 8(8) jack cat. 6), suitable for Cepex receptacles, part no. 4340 and versions
4215 screw terminals with labelling field suitable for installation in cable ducts and columns with labelling field, suitable for installation in cable ducts and columns
41452 TKM, Type: Data port insert 2 x RJ45, cat.6, type KDMF suitable for Cepex sockets, part no. 4300 and versions TKM, Type: Data port insert 2 x RJ45, cat.6, type KDMF, suitable for Cepex receptacles, part no. 4300 and versions
432 screw terminals
40787 for watertight plugs, wall mounted and panel mounted inlets 63 A, 3 p - 5 p for watertight plugs, wall mounted and panel mounted inlets 63 A, 3 p - 5 p
41440 for DELTA-BOX for DELTA-BOX, for tube diameter 9 mm, part no. 41440, for tube diameter 13 mm, part no. 41441
20162A screw terminals highly heat resistant contact carrier nickel plated contacts internal fixing enclosure base can be turned 180° receptacles are designed for adding an auxiliary contact switch highly heat resistant contact carrier, nickel plated contacts, internal fixing, 4 p and 5 p receptacles: enclosure base can be turned 180°
21160A screw terminals X-CONTACT highly heat resistant contact carrier standard flange dimensions uniform fixing hole spacing 20° inclination receptacles with pilot contact: part no. + index P X-CONTACT, highly heat resistant contact carrier, standard flange dimensions, uniform fixing hole spacing