Question & Answers

Three-phase sockets must be connected in such a way that there is a clockwise rotating field. The rotating field control test plug differs from normal plugs due to its transparent housing. By means of two control lamps inside the housing, this plug indicates whether the field is rotating in a clockwise or anticlockwise direction and checks that all 3 phases are present. This shows the direction of the rotating field. If the rotating field is correct, the green lamp lights up; if the rotating field is incorrect, the red lamp lights up and if a phase is missing, both lamps light up. More information

Yes, for 63A and 125A receptacles and plugs and connectors, this can be done with a so-called pilot contact switch or a PCS (PilotContactSwitch). (Pay attention to the “P” index for the part number)
Pilot contact: this involves another sleeve being added to the internal wiring, which uses the standard pin on the plug to establish a lagging connection.
PCS: this involves a switch being installed in the internal wiring. It is a normally open contact with no potential, which is mechanically provided with a lagging current via the pin in the plug.
In both cases this has to be requested when ordering; retrofitting is not possible.
With some types of 16-amp and 32-amp receptacles it is possible to install an auxiliary switch: part no. 41000 (retrofitting possible). Relevant appropriate receptacles are listed in the MENNEKES catalogue.

Yes, MENNEKES has several solutions available:

• Stainless steel receptacle combinations, CombiTOWER®, bollards and Cepex receptacles are equipped with a lock cylinder and can therefore be locked.
• It is also possible to equip DUO-interlocked receptacles and windows on combination enclosures with a padlock.

If a three-phase motor runs in the incorrect direction, our phase inverter products solve the problem quickly and safely. Use a screwdriver to release the lock and turn the insulating section with the two phase pins - the motor will now run in the opposite direction. More information

Please do not make any unauthorised deductions on your own.
Please send your debit note to vi@MENNEKES.de
Please state the reason and/or the basis for the debit (quotation number, old reference number, etc.), as well as your reference details (order number or invoice number)

The colour of a product relates to the nominal operating voltage. Our plugs and connectors are available, for example in Red, Blue, Yellow, Green and Black. You can find an overview of the colour codes and what they relate to at: more information

Our EverGUM® combination units are suitable for free-standing floor applications. A stand is therefore not required. 

Yes. A data sheet is available for download for each standard receptacle combination on the product detail page. For customer-specific solutions, a schematic diagram and an electric circuit diagram are included in the product text.

For products of our product range, you can download the declarations of conformity from the respective product pages, or you can request them. If it is a new receptacle combination that was customised to the needs of the customer, a declaration of conformity will only be available after the order has been received and the first device has been produced. 

No, the deactivation function is a safety aspect.